Sudan's fully integrated steel manufacturer — melted, casted, and rolled in Khartoum.
What we make
We make TMX reinforcement steel — and only TMX. Rolled, quenched, and tested perfection, batch after batch. No compromise, no excuses.
Our signature rib geometry doubles the surface contact between bar and concrete — measurably stronger bond, less slippage on long pours.
Bars are water-quenched at the rolling mill: a hard outer skin for tensile strength, a soft inner core for ductility — the best of both, baked in.
Mill equipment from Italy — the kind that runs European job-site steel — installed and tuned in Khartoum. Cleaner rolling, fewer stoppages, steadier metal.
Smelting, casting, and rolling, anchored at our Soba Alsabil site. We control the chemistry of every batch — and we stand behind the quality of every batch.
High elongation (≥9%) means our bars take a 90° bend cold and come back. Site fabricators can shape rings and stirrups without worry.
Every batch tested against SSMO, BS 4449, and IS 1786. The paperwork matches the metal.
Production process
Every Omega bar passes through five deliberate stages — we test, we adjust, we hold the standard. Bar by bar, batch by batch.
Incoming scrap is graded, magnetically separated, and chemistry-checked before it ever sees a furnace. Clean inputs, predictable outputs.
The induction furnace runs at 1,600 °C, melting batches in minutes and giving us full control of carbon, sulphur, and phosphorus levels.
Liquid steel is cast straight into square billets. No ingots, no re-heating waste — the metal flows from melt to mould without interruption.
Reheated billets pass through Italian mill stands that draw them down to size. Water-quenched on exit — TMT-treated to lock in strength.
Every batch is pulled, bent, and weighed in our on-site lab. Diameter, yield, tensile, elongation — all logged.
Quality
Every bar that leaves our plant is tested for yield, tensile strength, elongation, and chemistry.
Yield Strength
460N/mm²
Minimum, all sizes
Tensile Strength
1.10× yield
Minimum ratio
Elongation
9%
Minimum
Carbon Content
0.30% max
Weldable chemistry
Diameters
8 – 20mm
In 2 mm steps
Standard Length
12m
Cut to order on request
Rib Pattern
Double
Patented Omega geometry
Treatment
TMT
Thermo-mechanical, water-quenched
Contact Us
Sales & Marketing
The Mill
